# Wind Classification: The Input Your Frame Needs Why the site wind classification matters to framing, tie-downs and component selection, and where to find the project's assessed value. - Canonical HTML: https://www.chippy.tools/building-codes/au/framing/wind-classification-australia/ - Publisher: Chippy Tools - Updated: 2026-09-06 - Market: au - Code edition / reference: Wind report guide; check the adopted design standards - References: AS 4055; AS 1170.2 - Scope: Australian housing framing: reading plans, references and product details. No permitted member spans are supplied. - Source text checked: 2026-09-06 - Review scope: Public source text checked for this explanatory guide. No licensed span-table values or project design are verified. ## Get the wind result for the site Use the wind class or design pressures from the report for your site and building. A postcode does not supply that result. Nearby houses may have different exposure, land shape or building details. Check the report before the frame is ordered. ## What goes into the assessment? The [National Emergency Management Agency resource](https://www.nema.gov.au/our-work/resilience/national-resilience-action-library/information-contractors-builders-and-designers-wind-classifications) identifies four inputs to the AS 4055 process: | Input | What it describes | |-------------------|-------------------------------------------| | Wind region | The regional wind setting | | Terrain category | The roughness of the land around the site | | Topographic class | The effect of hills, ridges or slopes | | Shielding | The effect of surrounding buildings | These inputs need a site check. Do not guess them from a street address. The building must also fit the scope of the method used. ## Keep the method with the result AS 4055 is a wind-load standard for housing with scope limits. AS/NZS 1170.2 is another wind design reference. [WoodSolutions Guide 40](https://www.woodsolutions.com.au/system/files/WS%20TDG%2040%20Building%20Timber-framed%20Houses%20to%20Resist%20Wind%2011-20.pdf), sections 2.2 and 4, explains the distinction. That guide dates from 2016; use the standard edition required for the job. A report may give a house wind class or specific design pressures. Do not invent a conversion between them. Give the full report to the frame and component suppliers so they can use the stated design basis. ![Wind report check: confirm the site and building, read the method and result, match product limits, and check later changes.](https://www.chippy.tools/building-codes/au/framing/wind-classification-australia/workflow.svg) **Diagram labels:** CHECK THE WIND REPORT; CHIPPY TOOLS; CHECK THE WIND REPORT; 1; Site and building; Correct address and plan version; 2; Method and result; Standard edition, class or pressures; 3; Products and fixings; Match each system to the design; 4; Later changes; Have revised plans checked *Chippy Tools report checklist. See NEMA for the inputs. See WoodSolutions Guide 40 for the design context. No wind class is assigned here.* ## Check more than the timber size Wind loads affect the roof covering, fixings, joints, bracing and tie-downs. Doors and windows also need suitable ratings and details. Treat these as a connected design. A larger beam cannot make up for an unverified connection. Check the following before placing the order: - The report names the correct site and building. - Its plan version matches the frame plans. - The method, edition and result are recorded. - Product limits and fixing details match that design basis. - Any later changes have been checked. ## A mismatch worth catching Suppose a supplier quote names a wind class, but the plans have no matching report. Ask where the class came from. Do not accept a neighbouring job or the suburb name as proof. Get the missing assessment resolved before the quote becomes an order. Changes to roof shape, openings or shelter can also matter. Send changed plans to the designer and ask whether the report still applies. Keep the response with the [Chippy Tools code-check sheet](https://www.chippy.tools/building-codes/printables/#code-check). Once the wind design is settled, carry it into the [AS 1684 input check](https://www.chippy.tools/building-codes/au/framing/as-1684-span-tables-explained/). For Queensland roofs, read the [tie-down guide](https://www.chippy.tools/building-codes/au/qld/cyclone-tie-downs/) alongside the plans. ## Sources - [NEMA: wind classification assessment inputs](https://www.nema.gov.au/our-work/resilience/national-resilience-action-library/information-contractors-builders-and-designers-wind-classifications) - [WoodSolutions Guide 40 (2016), sections 2.2 and 4: wind design methods](https://www.woodsolutions.com.au/system/files/WS%20TDG%2040%20Building%20Timber-framed%20Houses%20to%20Resist%20Wind%2011-20.pdf) Publisher links identify the standards. This review did not inspect or reproduce their licensed span tables. - [AS 4055:2021 publisher catalogue](https://store.standards.org.au/product/as-4055-2021) Content adapted from the National Construction Code 2022, provided by the Australian Building Codes Board under the CC BY 4.0 licence. This page is general information for tradespeople and is not compliance, engineering or legal advice. Requirements are subject to state and territory variations and adoption timing. Always confirm requirements with your building certifier and relevant state authority. ## Frequently asked questions ### Can I find a wind classification from my postcode? A postcode alone is not enough. The assessment also needs site conditions and building details. Use the result and method recorded for your project. ### Is a wind region the same as a wind class? No. Wind region is one input. Terrain, topography, shielding and the method’s building scope also matter. ### Does a wind class approve all roof fixings? No. Match the actual roof and fixing system to the design, including its product limits. Read the full report and connection details together. ### What if the report gives pressures instead of a house wind class? Pass the full report to the designer and suppliers. Do not make up a conversion or assume a class from a pressure value. ## Source-check references - [NEMA: wind classification assessment inputs](https://www.nema.gov.au/our-work/resilience/national-resilience-action-library/information-contractors-builders-and-designers-wind-classifications) - [WoodSolutions Guide 40 (2016), sections 2.2 and 4: wind design methods](https://www.woodsolutions.com.au/system/files/WS%20TDG%2040%20Building%20Timber-framed%20Houses%20to%20Resist%20Wind%2011-20.pdf)