# Balustrade Height Requirements: When Do You Need One? When the NCC 2025 makes a balustrade compulsory, how high it has to be, and the gap limit that stops a kid slipping through — with a worked deck example. - Canonical HTML: https://www.chippy.tools/building-codes/au/stairs/balustrade-height-requirements/ - Publisher: Chippy Tools - Updated: 2026-09-06 - Market: au - Code edition / reference: NCC 2025 - References: HP 11.3 - Scope: Australia; Class 1 and 10 Housing Provisions. Confirm local adoption and variations. - Source text checked: 2026-09-06 - Review scope: Official source cross-check; not a site-specific compliance assessment. ## The requirement A balustrade — the rule book calls it a **barrier** — is there to stop someone falling off an edge. Two questions decide everything: **do you need one**, and **how high does it have to be**. The rule book covers both (NCC 2025, clause 11.3). **When you need one — the 1 m rule.** You need a barrier wherever the surface you stand on is **1 m or more** above the surface below it. Deck, balcony, landing, the edge of a raised floor — if the drop is a metre or more, a barrier goes in. A lower drop does not trigger this clause alone; other safety requirements may apply. This is the “1 m rule” you’ll hear on site, and it’s the heart of the balustrade rules. **How high.** The smallest barrier height depends on what you’re standing on: | Where | Minimum barrier height (NCC 2025) | |---------------------------------------------|-----------------------------------| | Above a floor, deck, balcony or landing | **1000 mm** | | Above a stair flight (from the nosing line) | **865 mm** | | Openings / gaps | must not pass a **125 mm** sphere | The bit everyone gets wrong is **where you measure from**. You measure barrier height from the surface you stand on — the finished floor or the decking — up to the top of the barrier. Not from the ground below. Not from the bottom rail. On a stair you measure straight up from the **nosing line**. That’s the straight line that touches the front edge of every step. Don’t measure off the top of each step. Measure from the wrong place and a barrier that reads 1000 mm on your tape can still fail. **Diagram labels:** 1; 2; 3; ≤ 125 mm; 1100 mm; ≥ 1000 mm; ≥ 865 mm NCC 2025 Housing Provisions 11.3 1. 1 deck surface 2. 2 nosing line 3. 3 ground Above a big drop the gap rules get tighter. Once the fall is **more than 4 m**, gaps still can’t let a 125 mm ball through. On top of that, the barrier can’t have anything a child could climb like a ladder in the **150 mm to 760 mm** zone. Below 4 m, the ball test is the one to watch. ## Work it out by hand You’ve built a deck. The highest point of the decking sits **1.1 m** above the lawn. Does it need a barrier, and how high? 1. **Check the 1 m rule.** 1.1 m is more than 1 m. So yes — you need a barrier along the open edge. 2. **Set the height.** It’s a deck floor, not a stair, so the smallest height is **1000 mm**. Measure it from the decking surface up to the top of the rail. The 1.1 m drop to the lawn doesn’t come into it. A top rail set at 1000 mm above the boards just clears the limit. Build to 1020–1050 mm and you’ve got room for the rail flexing and a dodgy tape. 3. **Check the gaps.** Space the balusters so a 125 mm ball won’t pass — a gap of about 100 mm gives you a buffer. The drop here is 1.1 m, well under 4 m, so the 150–760 mm no-climb rule doesn’t apply. Keep horizontal rails out of the design anyway and it’s a non-issue. 4. **Where the deck meets its stairs**, the barrier can drop to **865 mm** down the stair flight. Measure that from the nosing line. Across the landing it steps back up to 1000 mm. So: barrier needed, 1000 mm off the decking, 125 mm max gaps. These are the main dimensions in this example. Check the full barrier detail, including its structure and fixings. ## Calculate and keep your working [Download the Chippy Tools code-check worksheet](https://www.chippy.tools/building-codes/printables/) to record your inputs and the approved requirements. ## Related - Part of the [NCC rules for Australian builders](https://www.chippy.tools/building-codes/au/) — the cluster hub, with the state-by-state adoption tracker. - Building the stairs those barriers sit on? Start with [NCC stair requirements: riser, going & the 2R+G rule](https://www.chippy.tools/building-codes/au/stairs/ncc-stair-requirements/). ## Sources - **NCC 2025, ABCB Housing Provisions Standard, clause 11.3** — barriers (when required, minimum heights, opening limits). Confirm the fall-height trigger, the 1000 mm / 865 mm heights, and the 125 mm sphere test at [the official NCC provision](https://ncc.abcb.gov.au/editions/ncc-2025/adopted/housing-provisions/11-safe-movement-and-access/part-113-barriers-and-handrails). *(Confirmed against the NCC 2025 Housing Provisions Standard, source text checked 2026-09-06.)* Still on NCC 2022? This article is written against NCC 2025. NSW and SA don't adopt NCC 2025 until 1 May 2027, and Tasmania has frozen its residential changes — so if your job is being certified under NCC 2022, confirm the requirement against that edition. Core stair and room geometry is largely unchanged between editions; where a number did change, it's called out in the article body. Content adapted from the National Construction Code 2022, provided by the Australian Building Codes Board under the CC BY 4.0 licence. This page is general information for tradespeople and is not compliance, engineering or legal advice. Requirements are subject to state and territory variations and adoption timing. Always confirm requirements with your building certifier and relevant state authority. ## Frequently asked questions ### At what height do you need a balustrade in Australia? You need a barrier once the surface you stand on is 1 m or more above the surface below it — decks, balconies, landings, all of them. That's the '1 m rule'. A lower drop does not trigger this clause alone; other safety requirements may apply. A metre or more and a barrier goes in. ### How high does a balustrade have to be? Above a floor, deck, balcony or landing the barrier must be at least 1000 mm high. Above a stair it can drop to 865 mm. On a stair you measure from the nosing line — the line that touches the front edge of every step — not off each step. ### What is the maximum gap allowed in a balustrade? Gaps must be small enough that a 125 mm ball can't pass through. Once the drop is more than 4 m, you also can't have anything a child could climb like a ladder in the 150 mm to 760 mm zone. Below 4 m, the 125 mm ball test is the one to watch. ### Do I need a balustrade on my deck? If the deck is 1 m or more above the ground at any point, yes. A deck at, say, 1.1 m is over the line. It needs a barrier at least 1000 mm high, measured from the decking surface up. ### Where do you measure balustrade height from? From the surface you stand on up to the top of the barrier — the finished floor or decking. Not the ground below, and not the bottom rail. On stairs you measure from the nosing line, not off each step. ## Source-check references - [NCC 2025 Housing Provisions 11.3.3–11.3.5](https://ncc.abcb.gov.au/editions/ncc-2025/adopted/housing-provisions/11-safe-movement-and-access/part-113-barriers-and-handrails)